Phoenix Contact Nanoline NLC-035-024D-04I-02QRD-05A, User Manual

Page: 81 / 134

Operator Panel usage
2338_en_O PHOENIX CONTACT
77
Registers allow data to be stored in the following formats:
To modify a register value, use the

or

key to highlight the desired register and press
the <OK> key. Press the <3> key to access the modification screen.
Figure 5-33 Entering a register value
When set as retentive, the register value is stored in memory in the event of a power failure.
When power is restored, the stored value is recalled, and the control application uses the
stored value.
To set a register as retentive, from the register list screen, use the

or

key to highlight
the desired register. Press the <OK> key, and then press the <4> key to set the register as
retentive.
Figure 5-34 Setting a register as retentive
To set the register as non-retentive, from the register list screen, use the

or

key to
highlight the desired register. Press the <OK> key, and then press the <4> key to set the
register as non-retentive.
Figure 5-35 Removing the retentive setting
Integer xxx
Date xx/xx/xx
Time of Day xx:xx:xx
Day of Week MON, TUE, etc.
Hours, Minutes, Seconds xx:xx:xx
Seconds x.xxx