Phoenix Contact Nanoline NLC-035-024D-04I-02QRD-05A, User Manual

Page: 14 / 134

Nanoline
10
PHOENIX CONTACT 2338_en_O
1.3 nanoNavigator programming software
Programming is accomplished using nanoNavigator programming software. To provide a
simple-to-understand controller, nanoNavigator provides:
– control logic development using either flow chart or ladder chart programming
– easy-to-use human machine interface (HMI) development
– complete I/O interface definition
– ability to monitor running Nanoline controllers
– simulation of a project before loading it onto a controller
To program the Nanoline control system, simply select the desired flow chart blocks and
populate them with input and output data. Connect the blocks, download the program to the
controller, and it’s operational.
Using nanoNavigator, the programmer can create screens for display on the Operator
Panel. The screens not only display the desired data but can prompt for input from the
operator.
nanoNavigator software runs on a PC using a Windows
®
2000 or newer, 32- or 64-bit
operating system. nanoNavigator software is available for download at
phoenixcontact.com .
For more information on using the nanoNavigator software, refer to the nanoNavigator
User Manual.