Phoenix Contact FL BT EPA, User Manual, Page: 40 / 52

FL BT EPA
40
PHOENIX CONTACT 7900_en_01
Figure 2-9 “New Device” (“Neues Gerät”) dialog box in Factory Manager
The newly created module now appears as a device in the main window of Factory
Manager. Switch off the EPA module and then switch it on again with the MODE button
pressed. The update should now be executed automatically on the EPA module. The
progress is indicated in the bottom window of Factory Manager. Once the update is
complete, the device can be started up with the new firmware in the usual way under the
default IP address (10.0.0.100).
With the update installation, the EPA module loses all its current settings. The EPA module
is now reset to the default settings.