Phoenix Contact FL BT EPA User Manual Download Page 29 | Manualshive

Page: 29 / 52

Phoenix Contact FL BT EPA User Manual Download Page 29

Startup and configuration

7900_en_01

PHOENIX CONTACT

29

For a complete AT command reference, please refer to

download.phoenixcontact.com

The “AT Response” window also shows the commands sent via the graphical interface. This

overview can simply be used as a basis for automatic configurations from control programs

or SSC scripts.

Firmware update

The “Firmware update from TFTP Server” section can be used to transmit new firmware

versions.

Enter the IP address of the TFTP server and the name of the firmware file in the text fields

and click on the “Update” button. The firmware is then transmitted to the EPA and installed.

Most of the settings are retained.

For firmware updates, a TFTP server program is required. A wide range of products is

available on the Internet. For an example instruction along with the current firmware version,

please refer to

download.phoenixcontact.com

During firmware update, the autocrossing function is not available. Therefore, use a switch

or a crossed cable.

«
...
27
28
29
30
31
...
»

Summary of Contents for FL BT EPA





















































Reviews:

No comments