Phoenix Contact FL BT EPA, User Manual, Page: 32 / 52

FL BT EPA
32
PHOENIX CONTACT 7900_en_01
Info Return to Info page. The user remains logged in.
Logout Return to Info page. The user is logged off.
Advanced view Extend view by AT commands and the firmware update
option.
Network
IP configuration
IP Address Enter layer 3 network address (IP) of the EPA.
The address must be unique in order to address the WBM
during operation.
Subnet Mask Enter filter mask for IP addresses, default: 255.255.0.0
Default Gateway Enter IP address of the transition point to other network
segments, default: 10.0.0.100
Not required for communication within the address area.
IP Assignment Select the type of address assignment
– Static: permanent assignment via the “IP Address”
entry field (default).

The standard value is 10.0.0.100.
– DHCP: address is retrieved from an active DHCP
server in the network.

In the case that address assignment fails, the EPA
uses the address set in the “IP Address” field.
– Static & DHCP Server: the EPA itself uses the address
permanently set, and operates as the DHCP server for
other devices on the LAN side (start address 10.0.0.1).
Bluetooth
General
Operating Mode Operating mode of the device
PANU: client within a personal area network (PAN), can
also be used for point-to-point connections.
NAP: network access point (“master” in a PAN), up to
seven connections can be managed.
Max. Transmit Power Selection of the maximum transmission power (at the out-
put of the transmission level, the antenna gain of approx.
5 dBi must be added in the case of an internal antenna)
Note: Bluetooth automatically reduces the actual transmis-
sion power to the level required for the current connection.
Manually reducing the transmission power is only recom-
mended for range limitation.
Table 2-2 Parameter list for Info page [...]
Designation Description