Startup and configuration
7900_en_01
PHOENIX CONTACT
27
Setting up the client (FL BT EPA and FL BT EPA MP in PANU mode)
1.
Enter the new IP address, subnet mask (and gateway, if applicable) of the EPA.
Change the type of address assignment (“IP Assignment”) from “DHCP” to “Static”.
Apply the settings with “Set & Reboot”. (At this point, the WBM restarts with the new
IP address.)
2.
In the “Security” section, change the passkey to “MyKey4LaneA”. Transfer the entry
with “Set”.
3.
In the “Connection” section, change the “Connection Scheme” to “Connect to Name
(Fast)”. Enter the Bluetooth name “LaneA” in the “Name” field. Transfer the entry with
“Set”.
Optimizations (e.g., for PROFINET):
–
Under “Bluetooth – General, the “Data Policy” entry should be set to “Short Delay”. This
ensures that only DM 3 packets are used on the wireless side that are optimally tailored
to the length of standard PROFINET packets.
Now configuration is complete.
The settings that are not transferred to the EPA via “Set” are neither activated nor stored.
In any case, complete every section where changes have been made by clicking the “Set”
button.