FL BT EPA
6
PHOENIX CONTACT
7900_en_01
1.6.1.1
Drill hole template and housing dimensions
Figure 1-2
Housing dimensions and drill hole spacing for the device in millimeters
(inches)
1.6.2
DIN rail mounting
The FL EPA RMS mounting kit (2701133) is available as an accessory for mounting the
device on a 35 mm DIN rail.
Figure 1-3
Fixing the EPA to the mounting kit for the DIN rail
•
Use the two screws provided to fix the EPA to the base plate.
•
Place the EPA with the adapter on the top edge of the DIN rail.
•
Push the EPA towards the DIN rail until it snaps into place.
•
For releasing the adapter from the DIN rail, pull the latch downwards using a
screwdriver and simultaneously remove the EPA from the DIN rail.
82/3.228"
58/2.283"
91/3.583"
66/2.598"