FL BT EPA MP
7900_en_01
PHOENIX CONTACT
7
1.6.3
Wall or mast mounting
The FL EPA WMS (2701134) mounting kit can be used for EPA wall or mast mounting.
Figure 1-4
Fixing the EPA to the mounting kit for wall/mast mounting
•
Use the two screws provided to fix the EPA to the base plate.
•
The two 4.5 mm bore holes can be used for mounting. Two steel clamps are provided
for mounting the EPA to a mast (25 - 85 mm).
NOTE:
Observe the permitted operating temperatures of the EPA when using it outdoors.
The device is suitable for installation in protected outdoor areas (e.g., under a porch).
Direct sunlight may lead to overheating and permanent damage of the device.
