Phoenix Contact 1136419, User Manual, Page: 52 / 130

RFC 4072R
52 / 128
PHOENIX CONTACT 110146_en_00
Table 4 - 5 shows the possible states of the LEDs and provides a description of them.
“PN-C DETAILS” submenu Further information about the PROFINET controller is displayed in the “PN-C DETAILS”
submenu.
• To open the “PN-C DETAILS” submenu, tap the “PN Control” tile.
⇒ The “PN-C DETAILS” submenu opens.
Figure 4 - 35 “PN Control” menu, “PN-C DETAILS” submenu
The following information is displayed in the “PN-C DETAILS” submenu:
– “PROFINET adapter”:
Ethernet interface and corresponding system IP address used for PROFINET
– “Application relations”:
– “Projected ARs”:
Number of configured application relations to PROFINET devices
– “ARs with DiagInfo”:
Number of configured application relations to PROFINET devices on which an er -
ror has occurred
Table 4 - 5 Diagnostic indicators in the “PN Control” menu
LED Color State Description
BF Red On No link status at the Ethernet interfaces and/or no
100 Mbit transmission and/or no full duplex mode.
Flashing Link status present. At least one configured
PROFINET device has no communication connection.
Gray Off The controller has established an active communica -
tion connection to each configured PROFINET device.
SF Red On PROFINET group error
PROFINET diagnostics present.
Gray Off PROFINET diagnostics not present.