RFC 4072R
28 / 128
PHOENIX CONTACT
110146_en_00
4.11 Touch screen display
The controller has a resistive touch screen display (referred to as “display” in the following).
You can access important diagnostic and status information for the controller and its inter
-
faces via the various menus on the display. In addition, you can make various settings (e.g.,
set the IP address, specify the redundancy type, etc.).
Safety notes
NOTE: Damage to the resistive display caused by pointed or sharp-edged
tools
Pointed or sharp-edged tools or objects can cause irreparable damage to the resistive
display.
• To avoid damaging the display, only use your fingertips or the tools specified in the
technical data to operate the display.
• Only use slight pressure when operating the display.
DANGER: Risk of poisoning or chemical burns from escaping fluids or gases
If the display is damaged, fluids or gases that are hazardous to health can escape
from the display. There is a risk of chemical burns in the event of direct skin contact
with the fluids that escape. There is a risk of poisoning if the escaping gases are in
-
gested or inhaled.
• Avoid direct contact with the skin, and do not ingest or inhale any fluids or gases
that escape.