Philips VARILITE VL1100 LED Luminaire, User Manual

Page: 72 / 87

VARI
❋
LITE
®
- VL1100 LED
AND
VL1100 LED HP U
SER
’
S
M
ANUAL
58 13 June 2017 02.1602.0002
Menu Function Definitions
For easy reference, each possible menu item is listed alphabetically in the first column by its display
abbreviation. The second column follows with a definition of the abbreviation and then a third column
provides an explanation of its purpose and function.
Display Definition Purpose
10 Min 10 Minutes Sets Menu Display to automatically shut off after 10 minutes of non-use.
30 Sec 30 Seconds Sets Menu Display to automatically shut off after 30 seconds of non-use.
5 Min 5 Minutes Sets Menu Display to automatically shut off after 5 minutes of non-use.
Address DMX Address Accesses function for setting luminaire DMX starting address.
ALL All Motors Tests all internal motors.
ALL SEQ All Sequence This test sequences though all the features on this fixture.
Amber Amber Specifies Amber for manual control ( Manual ) or test Amber functions ( Test ).
Arc Arc Specifies luminaire as having an arc lamp source.
Blue Blue Specifies Blue for manual control ( Manual ) or tests Blue functions ( Test ).
Cal ON Calibration On Configures arc luminaire so that lamp will strike after calibration procedure is
complete.
Chan XXX DMX Channel Specifies DMX channel for display of current data value.
Clear Clear Clears stored parameters and re-calibrates luminaire.
ColorMix Color Mixer Tests color mixing mechanism.
Config System
Configuration
Accesses functions for setting lamp, pan/tilt, and Menu Display options. Also
accesses lamp information such as number of strikes, and hours used, along
with their respective reset function.
Data DMX Data Accesses function for displaying DMX data by channel number.
Diffusn Diffusion Specifies manual control of Diffusion ( Manual ) or tests Diffusion functions ( Test ).
Dimmer Dimmer Specifies dimmer mechanism for manual control ( Manual ) or tests dimmer/
strobe functions ( Test ).
Disable Disable Disables a function.
Display Display
Illumination
Accesses options for Menu Display on and off times.
DMX DMX Sets starting address for DMX systems.
Drv Ver LED Driver Version Displays current LED driver card software version.
Drv Temp LED Driver Temp Displays current LED Driver software version. A blank screen indicates a board
communication error.
Edge Edge Function Specifies edge function for manual control ( Manual ) or for testing ( Test ).
Enable Enable Enables a function.
Encoder Encoders Accesses encoder choices for diagnostic testing.
F1 RPM Fan 1 RPM Displays the speed of the Fan connected to J14 on the LED Driver Board. A
speed of 0 indicates a fan malfunction or board communication error.
F2 RPM Fan 2 RPM Displays the speed of the Fan connected to J15 on the LED Driver Board. A
speed of 0 indicates a fan malfunction or board communication error.
FAIL Test Fail Indicates that sensor test has failed.
Fixt Hrs Fixture Hours Displays total number of hours luminaire has been powered on.
Fixture Fixture Access luminaire specification information such as model, serial number, soft-
ware version, along with status information.