Philips VARILITE VL1100 LED Luminaire, User Manual

Page: 61 / 87

O
PERATION
: U
PDATING
S
OFTWARE
3
02.1602.0002 13 June 2017 47
a. Select Vari-Lite for luminaire type (as shown in Figure 3-4 .).
Figure 3-4: PEGASUS Software Selection Screen
b. As indicated in Figure 3-4 , click on Select Folder button to open browser window.
Step 6. In browser window, navigate to folder where Vari-Lite firmware was extracted.
a. Click on any file in folder.
b. Click
Open button on bottom of screen.
Step 7. When the LED Driver Board requires updating, a new
VL1100LED_xxxxxx_First.bin
file
will need to be updated first. Click on the bin file to be updated as highlighted in Figure 3-5 .
Figure 3-5: bin File Selection
Step 8. As indicated in Figure 3-5 , click on
Update Devices
to start upload.
a. During upload, PEGASUS and luminaire screens will display a progress bar showing
upload status.
b. Once progress bar shows completed on computer screen, wait approximately one minute
before moving to next step.
Note: The progress bar on luminaire LCD display may continue for a short time after computer
progress bar shows completed.
c. Once the firmware upload is complete, the VARI ❋ LITE luminaire(s) will automatically
recalibrate.
Step 9. When the fixture has completed the driver board update, the intensity will go full for 7
seconds, then go off for 7 seconds, and then repeat. At this time, select the
A
B
Progress Bar
NOTE: Select High Speed
option when uploading to
16 or less luminaires.