Philips VARILITE VL1100 LED Luminaire User Manual Download Page 7 | Manualshive

Page: 7 / 87

background image

F

OREWORD

02.1602.0002

13 June 2017

iii

3. Note distance requirement from combustible materials or illuminated objects for VARI

❋

LITE

luminaires.

WARNING:
INSTRUCTIONS FOR CONTINUED PROTECTION AGAINST ELECTRICAL SHOCK

1. VARI

❋

LITE luminaires are designed for dry locations only. Exposure to rain or moisture may

damage luminaire.

2. Disconnect power before servicing any VARI

❋

LITE equipment.

3. Servicing to be performed by qualified personnel only.

WARNING:

Possibly hazardous optical radiation emitted from this product.

WARNING:
INSTRUCTIONS FOR CONTINUED PROTECTION AGAINST EXCESSIVE EXPOSURE TO
UV RADIATION

1. Many VARI

❋

LITE® luminaires use a lamp that produces UV radiation. DO NOT look directly at

lamp.

2. It is hazardous to operate luminaires without lens or shield. Shields, lenses, or ultraviolet screens

shall be changed if they have become visibly damaged to such an extent that their effectiveness is
impaired. For example, by cracks or deep scratches.

WARNING:
INSTRUCTIONS FOR PROTECTION AGAINST INJURY TO PERSONS

1. Exterior surfaces of the luminaire will be hot during operation. Use appropriate safety equipment

(gloves, eye protection, etc.) when handling and adjusting hot equipment and components.

2. Luminaires will have a hot lamp when operating. Disconnect power and allow lamp to cool before

replacing.

3. Arc lamps emit ultraviolet radiation which can cause serious skin burn and eye inflammation.

Additionally, arc lamps operate under high pressure at very high temperatures. Should the lamp
break, there can exist a danger of personal injury and/or fire from broken lamp particles being
discharged.

4. Wear eye protection when relamping.
5. Appropriate safety equipment (gloves, eye protection) should be used when handling damaged

lamps.

6. If lamp is touched with bare hands, clean lamp with denatured alcohol and wipe with lint-free

cloth before installing or powering up the luminaire.

7. The lamp shall be changed if it has become damaged or thermally deformed.

WARNING:
RF INTERFERENCE

1. This is a Class B product. In a domestic environment this product may cause radio interference, in

which case, the user may be required to take adequate measures.

«
...
5
6
7
8
9
...
»

Summary of Contents for VARILITE VL1100 LED Luminaire
























































































Reviews:

No comments

Related manuals for VARILITE VL1100 LED Luminaire

Tetrix 351 AC/DC Smart FW

Brand: EWM Pages: 117

Brand: Malmet Pages: 14

Brand: Zempire Pages: 2

Brand: idiag Pages: 12

Brand: Backyard Discovery Pages: 51

Brand: Nautilus Pages: 12

Brand: CAIRE Pages: 16

Brand: Nakayama Pages: 37

Brand: jablotron Pages: 2

Brand: unios Pages: 2

Brand: Velleman Pages: 16

Brand: Velleman Pages: 11

Brand: ZacUrate Pages: 2

Brand: ZacUrate Pages: 2

Brand: Qtx Pages: 6

LED PowerBank 48

Brand: SHOWTEC Pages: 12

Brand: Kanlux Pages: 4

Brand: PARAMOUNT BED Pages: 28

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands