Philips VARILITE VL1100 LED Luminaire User Manual Download Page 60

Page: 60 / 87

VARI

❋

LITE

- VL1100 LED

AND

VL1100 LED HP U

SER

’

ANUAL

13 June 2017

02.1602.0002

Installing or Updating Luminaire Firmware

Luminaire firmware for the VL1100 LED luminaire can be loaded via PEGASUS. This section
describes the process.

Note:

To determine software version at luminaire, see

“Verify software version at luminaire:” on

page 49

Using PEGASUS Uploader

When luminaires are data linked together, you can program up to 32 luminaires at the same time; refer
to

“Connecting Data and Power” on page 28

. To program more than 32 luminaires (or devices),

program them in batches of 32 or less.

Important Notes and Warnings:

•

DMX Data must be disconnected before uploading software to luminaires. Do not merge
firmware files with DMX signals.

•

You can upload multiple firmware files to a variety of luminaires that are data linked together.
Each model of Philips Entertainment luminaire recognizes its own software and only
downloads the appropriate file.

•

Sometimes two files are required - one for the LED driver and one for the fixture.

•

Do not use a USB hub, always connect directly to a USB port on your computer.

To install or update luminaire firmware using PEGASUS upload cable:

Note:

DMX Data must be disconnected before uploading software to luminaires. Do not merge

firmware files with DMX signals.

Step 1. Visit Philips Entertainment Lighting web site (

www.philips.com/entertainmentlighting

) and

download product firmware you wish to update.

Step 2. Unzip firmware file you downloaded to a folder on your computer.
Step 3. Insert USB Upload Cable

(sold separately)

into a USB 2.0 compatible port on

your computer

(do not use a USB hub)

Step 4. Double click on PEGASUS Software shortcut on your desktop.
Step 5. When application opens:

Summary of Contents for VARILITE VL1100 LED Luminaire
























































































Search results

Summary of Contents for VARILITE VL1100 LED Luminaire

Reviews:

Related manuals for VARILITE VL1100 LED Luminaire

Brands by name

Popular brands

Philips VARILITE VL1100 LED Luminaire, User Manual

Search results

Summary of Contents for VARILITE VL1100 LED Luminaire

Reviews:

Related manuals for VARILITE VL1100 LED Luminaire

Brands by name

Popular brands