Philips Pronto SBCRU990/05 User Manual Download Page 19 | Manualshive

Page: 19 / 72

background image

User Guide

17

EN

Getting Started

Operating ProntoPro NG

ProntoPro NG contains a series of customizable devices, each consisting of several
device pages. All active devices on your ProntoPro NG are listed in the Device
Overview. All the available device pages are listed per device in the Page
Overview.

Device Overview

The Device Overview offers you a list of all the devices you can control with
ProntoPro NG. To view the Device Overview, press the

Device Overview

button

at the top of the touch screen.

You can navigate between the devices in two different ways:

■

Tap the device you want to operate from the Device Overview.

■

Tap the

Device Left

button

at the top of the touch screen to navigate to

the previous device.

Tap the

Device Right

button

at the top of the touch screen to navigate to

the next device.

By default you navigate through ProntoPro NG, using this touch screen navigation.
When cursor navigation is enabled, the Device Left and Device Right button

disappear and the

Cursor Navigation

icon

appears at the top left. You then

navigate through the devices and pages using the cursor. For more information on
changing the touch screen navigation to cursor navigation, see ‘Operating
ProntoPro NG with the Cursor’ on page 48.

Device Right
button

Device Left
button

Device Overview
button

ProntoProNG_0505_ML_1EN.qxd 14-06-2005 09:54 Pagina 17

«
...
17
18
19
20
21
...
»

Summary of Contents for Pronto SBCRU990/05









































































Reviews:

No comments

Related manuals for Pronto SBCRU990/05

Brand: Lattice Semiconductor Pages: 30

Brand: WAFER Pages: 15

Brand: Handicare Pages: 56

Brand: 7bit Pages: 2

Brand: Jafar Pages: 15

Brand: HANYOUNG NUX Pages: 56

Brand: Daikin Pages: 46

Brand: Daikin Pages: 26

Brand: Gardigo Pages: 6

Brand: VAT Pages: 14

RDS17S-ELITE1-R1

Brand: D&R ELECTRONICS Pages: 12

iDual A E27 iD60

Brand: jedi LIGHTING Pages: 23

Brand: Elotech Pages: 20

Brand: Intermatic Pages: 2

Brand: Blucave Pages: 2

Brand: Beckhoff Pages: 30

Brand: Festo Pages: 109

Brand: Topworx Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands