Philips Pronto SBCRU990/05 User Manual Download Page 16

Page: 16 / 72

User Guide

Getting Started

Setting Time and Date

When you have installed the battery pack and turned on ProntoPro NG, you have to
set the current time.

Attention

Every time you reset your ProntoPro NG you will have to set the time again.

Changing the Time Format

1 Tap and hold the

ProntoPro NG

icon

in the upper left corner of the

touch screen for 3 seconds.

The Tools Menu appears.

2 Tap

button in the Tools Menu.

The first Settings Page appears.

3 Tap the

Time Format

button

in the first Settings Page.

The Time Format button toggles between the three time formats:

■

12 hour (AM/PM): This is the default format;

■

24 hour;

■

No time.

4 Tap the

ProntoPro NG

icon

to exit the Tools Menu.

Changing the Time

1 Tap and hold the

ProntoPro NG

icon

in the upper left corner of the

touch screen for 3 seconds.

The Tools Menu appears.

2 Tap

in the Tools Menu.

The first Settings Page appears.

3 Tap the

Time

button in the first Settings Page.

The Time button is selected. The labels ‘

’ and ‘

’ appear for the two middle

firm keys.

ProntoProNG_0505_ML_1EN.qxd 14-06-2005 09:54 Pagina 14

Summary of Contents for Pronto SBCRU990/05









































































Search results

Summary of Contents for Pronto SBCRU990/05

Reviews:

Related manuals for Pronto SBCRU990/05

Brands by name

Popular brands

Philips Pronto SBCRU990/05, User Manual

Search results

Summary of Contents for Pronto SBCRU990/05

Reviews:

Related manuals for Pronto SBCRU990/05

Brands by name

Popular brands