10
Decoder Software Upgrade
Your receivers software may be upgraded via the satellite transmission.
New software versions for your receiver will be broadcast on Astra19.2°
orbital position. Therefore, if your antenna setup does not include
Astra19.2° satellite, you will not be able to get your receiver updated.
To check whether a new software version is available for your receiver,
select the
Decoder Status
from the
Installation
submenu. Then, select
the
Decoder Upgrade
item from the
Decoder Status
submenu. Then
a check is made whether a new software version is broadcast from
Astra19.2° orbital position. If new software exists, you will be prompted
to press
OK
to initiate the upgrading process.
Checking For Upgrade
Also, when you switch your receiver into the standby mode, the check is
made whether new software version is available. If new software is
detected, either the upgrade is made in the standby mode (the
Auto
Upgrade
option is set to
Yes
), or you are informed about upgrade
availability when you switch your receiver into the operate mode (the
Auto Upgrade
option is set to
No
).
Upgrade Can Be Initiated
To modify the
Auto Upgrade
option, press the
MENU
key. From the
Main Menu
, select the Installation submenu, then select the
Settings
submenu. Next, select
System Settings
item to get access to the
Auto
Upgrade
item.
Upgrade Notification (Auto Upgrade = No)
English
30
DECODER SOFTWARE UPGRADE
Summary of Contents for DSR5600/00
