Philips DSR5600/00, Manual

Page: 74 / 100

8.4.1.3 Installation / Settings / Modem Settings
Your receiver is equipped with an internal modem. To configure your
modem parameters use the remote control keys presented in the help
bar. Pressing BLUE allows you to enter letters, pressing YELLOW
switches between lowercase characters and uppercase characters,
pressing RED gives you access to a table of special characters. If you
want to delete characters in the entry box, press the
m m
key. Once you
have configured your modem, press
OK
to confirm its configuration.
Modem Settings Screen
8.4.1.4 Installation / Settings / Country
The Select Country screen allows you to select the country for which
your receiver shall be configured. Press V or W to highlight the
country, and then press
OK
to make a selection. You may need this
option if you take your receiver to another country or if you have
selected the wrong country during the first-time installation of your
receiver.
Select Country
8.4.1.5 Installation / Settings / Local Time
You may need to adjust your local time. Use the C / B keys to change
the Time Zone until the Local Time setting corresponds to your local
time. Then press the
OK
key to confirm any changes.
Local Time Screen
8.4.2 Installation / Antenna Configuration
The Antenna Configuration screen allows you to set the following
options.
LNB Power
It may be assigned two values: ON (default setting) or OFF . It may be
necessary to deactivate LNB supply for some antenna systems.
LNB Power (Standby)
It may be assigned two values OFF (default setting) or ON . You may
need to activate LNB supply in standby mode for some antenna systems.
Antenna Control
It may be assigned three values: OFF (default value), Tone Burst , or
DiSEqC 1.0 . Select the setting applicable to your antenna system.
24 CHANGE THE SETTING OF YOUR RECEIVER
English
Antenna Configuration