Philips DSR5600/00, Manual

Page: 78 / 100

9 Advanced Settings
9.1 Easy Recording
The Easy Recording feature allows you to perform recordings without the necessity to program your VCR. You set a
recording reminder or timer from the Channel Banner or Timer Manager , and the VCR starts/ends recording at the
correct time. Please note, however, that you may utilize the Easy Recording feature provided that your equipment
supports it.
●
First of all, consult User Manual of your equipment to check if it supports Easy Recording. Please note that most Philips
VCR/DVD recorders support one of the two Easy Recording options: either Prepare Record (to be checked first) or
Record Link.
●
Also, both your TV and VCR shall be equipped with two SCART sockets.
If your equipment satisfies above two conditions, connect your receivers as shown in the Connection diagram below.
Then, select the System Settings item from the Settings submenu, enable the Easy Recording feature, and assign to the
Recording Type an appropriate value: either Prepare Record or Easy Recording . You might have to test both settings to
find out the one applicable for your recorder.
Assuming the settings of your receiver and recorder (refer to your VCR or DVD recorder user manual) are done , to
perform a recording you shall:
- Program a timer with your receiver (refer to 6.10 section),
- Put your recorder in the appropriate status to be controlled by your receiver (refer to the VCR or DVD recorder user
manual).
At timer occurrence your recorder shall start and stop recording automatically.
Note: While the recording is in progress, your receiver is protected from inadvertent action to disrupt the recording. Please note that
during the recording the “rEc” label is displayed on the front panel display. To cancel the running recording, press
EXIT
. This brings up a
small window prompting you for confirmation. To cancel the recording altogether, press
OK
.
Satellite recever
English
28 ADVANCED SETTINGS