Philips DSR5600/00, Manual

Page: 73 / 100

CHANGE THE SETTING OF YOUR RECEIVER 23
8.4.1 Settings
The Settings submenu allows you to change TV/system/modem settings,
to adapt the Country setting as well as to adjust the local time.
Settings Submenu
8.4.1.1 Installation / Settings / TV Settings
The TV Settings screen contains two options: TV Screen Format and
Display Format . Change the TV Screen Format setting, if necessary.
You may also change the default Display Format value (Letter-box) to
change the way the video is transformed if the broadcast aspect ratio is
different than the aspect ratio of your TV. Read the descriptions that
appear in the TV Settings screen before you make a decision.
TV Settings Screen
8.4.1.2 Installation / Settings / System Settings
The System Settings screen contains some of the configuration
parameters you may change.
TV SCART Output, VCR SCART Output
Select the appropriate format of the output signals. We advise RGB
format for TV SCART because it gives the best picture quality.
Dolby Digital
If you use the Dolby Digital receiver, change the value of the Dolby
Digital option to Yes .
Note: If you set this option to Yes, when the broadcast carries Dolby Digital:
- No audio will be available at receiver's TV & VCR SCARTs as well as L/R audio
outputs. Only Dolby Digital bit stream (AC3 - 5.1) will be available at Digital
Optical Out.
- During a timer, the receiver will automatically switch back to PCM (2 channel
in digital) and audio will be available at receiver's TV & VCR SCARTs as well as
L/R audio outputs to allow recording of audio.
Auto Upgrade
When you switch your receiver into the standby mode, the application
checks whether a new software version is available. If the new software
version is detected, you will be informed about the availability of the
receiver’s upgrade once you have switched your receiver into the
operate mode. However, you may switch the Auto Upgrade option to
Yes . In this case the receiver’s software will be upgraded automatically
when the receiver is in the standby mode.
You will find detailed info concerning: the Easy Recording , Recording
Type and Device settings in the Advanced Settings 9.1 - 9.2 sections.
English
System Settings Screen