Philips 1146562 User Manual Download

Page: 53 / 64

Cleaning 47

Philips Respironics E30 User Manual

4. Use one of the following to disinfect all exterior surfaces of the device and O

inlet port:

—

70% Isopropyl Alcohol (Device and O

Inlet Port)

—

DisCide Towelettes (Device ONLY)

—

10% Chlorine Bleach solution (Device ONLY)

5. Pay close attention to all corners and crevices.

6. Allow the device to dry completely before plugging in the power cord and re-inserting the filter(s).

6.4 Service

The device does not require routine servicing or preventative maintenance other than inspection for normal
wear or damage and device cleaning.

Warning

If you notice any unexplained changes in the performance of this device, if it is making unusual
or harsh sounds, if it has been dropped or mishandled, if water is spilled into the enc

losure,

or if the enclosure is broken, disconnect the power cord and discontinue use. Contact Philips
Respironics.

Summary of Contents for 1146562
































































Search results

Summary of Contents for 1146562

Reviews:

Related manuals for 1146562

Brands by name

Popular brands

Philips 1146562, User Manual

Search results

Summary of Contents for 1146562

Reviews:

Related manuals for 1146562

Brands by name

Popular brands