Philips 1146562, User Manual

Page: 30 / 64

24 Device setup
Philips Respironics E30 User Manual
Comfort settings
Choosing this screen will take you to a sub-menu where you can adjust the humidification and
pressure comfort settings. These settings are described here.
Note
Not all settings shown here will display on the device. The display will vary based on therapy device
model and device settings.
Icon Text Description
Humidification This setting enables what the patient can use. You can choose between
Fixed or Adaptive (A) humidification.
Fixed mode applies a constant heat on the humidifier heater
plate. Under certain conditions and settings, this mode can allow
condensation to occur in the tube. Adaptive mode adapts the heater
plate temperature to the ambient conditions in the room, and is
designed to not allow condensation to occur in the tube.
Humidifier This setting allows you to choose the desired humidity setting for the
humidifier: 0, 1, 2, 3, 4 or 5.
Tube Type This setting allows you to select the correct size diameter tubing that
you are using with the device. You can choose either (22) for the 22 mm
tubing, or (15) for the 15 mm tubing.
Tube Type Lock This enables you to lock the Tube Type setting for either the 22 mm or
the 15 mm tubing if you do not want the patient to change it.
Mask Type This setting allows you to adjust the setting based on mask type. Each
Philips Respironics mask may have a System One resistance control
setting. Contact Philips Respironics or the product support team if you
cannot find this resistance setting for your mask.
Mask Type
Lock This enables you to lock the Mask Type resistance setting if you do not
want the patient to change it.