Philips 1146562, User Manual, Page: 22 / 64

16 Device setup
Philips Respironics E30 User Manual
1. Lift up on the filter access door and swing open. If replacing, pull out the old filter assembly.
2. If applicable, place a clean, reusable blue pollen filter (1) on top of a new, optional disposable light-blue
ultra-fine filter (2) and firmly snap them together.
3. Place the new filter assembly back in the side of the therapy device. Swing the door closed.
3.2 Positioning the device
Place the device on a firm, flat surface within easy reach, at a level lower than the patient’s sleeping
position. Or attach to the DreamStation Roll Stand per the accompanying instructions. Make sure the device
is away from any heating or cooling equipment (e.g., forced air vents, radiators, air conditioners).
Cautions
Make sure the filter area on the side of the device is not blocked by bedding, curtains, or other
items. Air must flow freely around the device for the system to work properly.
Do not place the device directly onto carpet, fabric, or other flammable materials.
Do not place the device in or on any container that can collect or hold water.