Permobil ROHO Hybrid Select Operation Manual Download Page 11

Page: 11 / 160

ROHO Hybrid SELECT Operation Manual

Troubleshooting

For additional assistance, contact the equipment provider, distributor, or Customer Support.
Not holding air

Confirm that the inflation valve is completely closed.

Inspect all components for damage. Look for holes in the cushion. If very small holes or no holes are visible, follow the

instructions in the Repair Kit provided with the product. For damage to the ISOFLO or the tubing or for large holes or leaks in the

cushion components, see the Limited Warranty supplement, or contact Customer Support.

Repair Kit Warning:

DO NOT allow any liquid to enter the cushion components.

Not able to inflate or

deflate the cushion

Confirm that the ISOFLO is open.

Confirm that the inflation valve is open.

Make sure that all quick disconnects are securely connected.

Uncomfortable / unstable

Confirm that the air pad has the correct amount of air. See the Transition Check and Immersion Check instructions.

Make sure the cushion components are correctly placed on the foam base; the hook / loop fastener strips on the air cells and

the foam base should match up.

Make sure the air cells face up and the top of the cover faces up.

Confirm that the cushion is centered beneath the individual and that the cushion is properly sized to the individual and the

wheelchair.

If the cushion still feels uncomfortable or unstable after checking all of the above, immediately consult the prescribing healthcare

professional.

The cushion slides on the

wheelchair

Make sure the non-skid bottom of the cushion cover faces down.

Use directional labels on the cushion and on the cover to orient the cushion.

When possible, use hook and loop fasteners to further secure the cushion to the seating surface. Hook fasteners are available

upon request.

A component is damaged Contact Customer Support for a replacement.

Product Specifications

Materials:

Large Air Pad / IT Pad: neoprene rubber; made without latex; Inflation valve: Zytel; Tubing: urethane; ISOFLO Memory Control: polycarbonate, aluminum, polypropylene;

Foam Base: polyurethane; Cover: two-way stretch, fluid-resistant top and sides, with a zipper on the back and sides, and a non-skid bottom. Refer to cover care label for material

content and for compliance to flammability requirements.

WIDTH (W) - in. (cm)



14 (35.5) 15 (38)

16 (40.5) 17 (43)

18 (45.5) 20 (51)

Notes:

All measurements are approximate.

Width and depth measurements are taken from the top of the

foam base and are rounded to the nearest ¼ in. or 0.5 cm.

Item numbers and cover labeling indicate the wheelchair size

that the product is designed to fit.

** Depths shown include ¾ in. (1.5 cm) of foam base that fits

between the wheelchair back posts.

WEIGHT:

4 lbs. / 1.8 kg (based on 1818)

SEATED HEIGHT:

3½ in. / 9 cm

DEPTH (D)** - in. (cm)



Contoured Foam Base width x depth

14¾ (37.5)

1414

15¾ (40)

1515

1615

16¾ (42.5)

1416

1516

1616

1716

1816

2016

17¾ (45)

1517

1617

1717

1817

2017

18¾ (47.5)

1618

1718

1818

2018

20¾ (52.5)

1620

1720

1820

2020

Cushion expected lifetime: 5 years Cover expected lifetime: 1 year

Accessories* Compatible with Hybrid Select:

ROHO Planar Solid Seat Insert

* Not available in all markets. Contact Customer Support.

Storage, Transport, Disposal and Recycling

Storage or Transport: Clean and disinfect the product. Open the inflation valve. Place in a container that protects the product from moisture, contaminants

and damage. After storing or transporting, inspect the product to ensure it was not damaged (see "Troubleshooting"), and follow instructions to prepare the

product for use.
Disposal: The components of the products in this manual are associated with no known environmental hazards when properly used and when disposed of

in accordance with all local/regional regulations. At the end of its useful life, treat as healthcare waste and dispose of according to local healthcare-waste

guidelines. Incineration must be performed by a qualified, licensed waste management facility.
Recycling: Contact a local recycling agency to determine recycling options for the product.

Limited Warranty

Limited Warranty Term from the date the product was originally purchased: cushion, 36 months; cover, 6 months. The warranty does not apply to punctures,

tears or burns. See also the Limited Warranty supplement provided with the product, or contact Customer Support.