98 . Frontier IR Dual-Range Systems User's Guide
Appendix 2: Instrument Self-Checks
NOTE: It can take the instrument about two hours to equilibrate when switched on after
being switched off overnight. To save time, we suggest that you leave the
spectrometer switched on at all times.
•
When you switch on the instrument, the instrument display provides this sequence of
messages:
>
Initializing
Initializing
Checking Program Integrity
Checking Instrument Configuration
Checking Source
Checking Laser
Checking Scan
Checking Calibration
Initialization Complete.
•
When initialization is complete the last message fades, leaving the instrument identity
message:
PerkinElmer Frontier FT-IR
When connected to a PC, the instrument display adds
Ready
.
•
When collecting data, the instrument display provides prompts generated by the
PerkinElmer software.
Summary of Contents for Frontier IR
