PerkinElmer Frontier IR, User Manual

Page: 37 / 104

Unpacking and Installation . 37
Unpacking the spectrometer
WARNING
The Frontier IR spectrometer is a heavy precision instrument, so two
people are required for safe handling.
The instrument weighs approximately 36 kg unpacked (40 kg packed)
and has a lifting recess on either side. Consult the local codes of practice
issued by safety advisors before attempting to lift it.
Take care not to injure yourself or others, or to drop the instrument.
CAUTION
Take great care when installing your Frontier IR spectrometer, and
follow the procedures described in this manual. If you require assistance,
contact your local PerkinElmer Service Engineer.
Opening the shipping container
Your instrument is packed inside the box in a silver bag that protects it from condensation.
The beamsplitters are packed as a kit in a separate protective box.
1. First remove the manuals/software box, leads, and so on from the box, and check that
all the following parts are present:
Part
Number
Description
L1250432 Quick Change Window Kit (Frontier FT-IR/FT-FIR only) 1
L1202057 Polystyrene Calibration Film 1
L1250405 NIR Performance Validation Kit (Frontier FT-IR/FT-NIR only) 1
04974265 Quick Release Purge Coupling 2
L1200466 Ethernet Crossover Cable 1
04970839 2A, 250V Time Lag Fuse 2
L9003693 8.0 mm Hexagonal Wrench 1
N0171159 Desiccant Kit (Frontier FT-IR/FT-FIR only) 1
L1050002 IR & Raman Manuals CD 1
LX108873
OR
LX108875
Spectrum Standard Software Kit
OR
Spectrum ES Software Kit
1
L1250230 Spectrum Configuration Disk 1