PerkinElmer Frontier IR, User Manual

Page: 92 / 104

92 . Frontier IR Dual-Range Systems User's Guide
2. Snip, and remove, the cable tie surrounding the power supply, noting how it secures the
laser cables (Figure 57).
The laser power supply fixings are accessible from the left of the instrument.
Figure 57 Laser power supply fixings (from left of instrument)
3. Slacken the two screws securing the laser power supply.
4. Unscrew and remove the cable clip that secures the thin black and red PSU laser cable
at the rear of the instrument, underneath the laser assembly (Figure 58).
Figure 58 Laser board connector and cable clip (from top of instrument)
5. Disconnect the black and red PSU laser cable from the board.
WARNING
Be careful, the nearby source housing may be hot.
Instrument cover rear hinge
Connector
Cable clip
Screw
Screw
Cable tie