24
20.8
32.5
B2 Connecting to the Systems
SB-A0, A, B, C
SB Brace Frame for single-sided walls
Instructions for Assembly and Use – Standard Configuration
Mounting the Brace Frame
1. Position the element or element unit
on timbers.
2. Adjust the formwork support (20.8) to
the required height (stop).
3. Open clamping jaws (32.5).
4. Lift the Brace Frame with the crane
into the opened Brace Frame Connec-
tors SB-A, B, C.
The bottom Connector SB lies against
the formwork support.
4. Close clamping jaws with cam nuts
beginning from the bottom.
(Fig. B2.08 + B2.08a)
For further work steps, see Section B2
VARIO GT 24 from Point 6.
Fig. B2.08a
Fig. B2.08b
Fig. B2.08c
