31
40
40
33
33
33
33
C1 Connecting to the Systems
SB-1
SB Brace Frame for single-sided walls
Instructions for Assembly and Use – Standard Configuration
Connecting to VARIO GT 24
Max. concreting height h = 3.60 m
Connecting to RUNDFLEX
Max. concreting height h = 3.00 m
Take into account the respective sys-
tem Instructions for Assembly and
Use.
Required components per waler sec-
tion:
33
Hook Strap SB-1, 2
1x
Alternative: Hook Strap SB-2, asymetric
Connecting with Hook Strap SB-1, 2
1. Place Brace Frame in position with
the crane and set down on steel
waler/Distribution Waler.
2. Release nut on the Hook Strap (33)
and push bolt through the hole on
the Brace Frame.
3. Mount hook on the steel waler/Dis-
tribution Waler, and secure Hook
Strap with nut.
(Fig. C1.01a at top, C1.01b at bottom)
4. Attach additional Hook Straps to the
next steel waler/Distribution Waler.
5. Release crane lifting gear.
6. Mount second Brace Frame.
7. Brace the Brace Frames with scaf-
fold tubes (40) (horizontal and verti-
cal).
8. Check all fixing points to ensure they
are secure.
9. Release crane lifting gear
10. Mount concreting platform: see
Instructions for Assembly and Use of
the system.
11. Adjust height of the transportable
unit with the spindles.
Erection
Erect, move, align and anchor transport-
able unit with textile strap and crane,
see C2.
Fig. C1.01a
Fig. C1.01b
Fig. C1.01a
Fig. C1.01b
VARIO GT
RUNDFLEX
