59
RCS-2 Climbing Device and Hydraulics
Assembly Instructions
D7 Remedial measures for malfunc-
tions
Fig. D7.05
1.1
9.1
9
1
Dismantling the climbing de-
vice with broken spring
Body parts can become trapped between
climbing rails and climbing shoes!
This can result in serious injuries.
⇒
Do not hold the climbing shoe and
climbing rails when the climbing unit is
being moved.
■
In the event of broken leg springs (
5.8
)
in the cylinder base, tip back the climb-
ing device (
1
) by hand into the climbing
rail (
9
). The climbing procedure can
then be completed.
■
After completing the climbing proce-
dure, replace the climbing device or
have repair work carried out by PERI.
Procedure
1. Retract piston until the claw (
1.1
) is
guided around the climbing bolts (
9.1
).
2. Pull the climbing device to the climbing
rail and position the claw (
1.1
) by hand
between the profiles of the climbing
rail. (Fig. D7.05)
3. Extend the climbing device and guide it
until the claws (
1.1
) engage with the
climbing bolts (
9.1
).
Are all claws engaged on the climbing
bolts?
Also use this procedure in the event of
forward or laterally inclined climbing rails.
Summary of Contents for MO-20-00445 0
Page 61: ...61 RCS 2 Climbing Device and Hydraulics Assembly Instructions ...
Page 79: ......
