45
RCS-2 Climbing Device and Hydraulics
Assembly Instructions
D4 Climbing procedure
Climbing platforms individually
1. Stop approx. 2 cm in front of the climb-
ing shoes (
5A
).
2. Press the “Operation Mode” button
(
3.17
), until the button flashes orange.
→
Single-mode operation is activated.
3. Insert the platform individually into the
climbing shoes by:
– pressing the “Cylinder Extend” but-
ton on the keypad.
or
– pressing the “Cylinder Extend” but-
ton on the connected remote control.
4. Press the “Operation Mode” button
(
3.17
), until the button lights up green.
→
Interlink-mode operation is activated.
Fig. D4.10
3.17
Summary of Contents for MO-20-00445 0
Page 61: ...61 RCS 2 Climbing Device and Hydraulics Assembly Instructions ...
Page 79: ......
