Pentax WG-10, Operating Manual

Page: 98 / 298

96
3
Ta
king
Pict
ures
1
Press the four-way controller (
2
) in
A
mode.
The [Drive Mode] screen appears.
2
Use the four-way controller
(
45
) to select
j
or
c
and
press the 4 button.
The camera is ready for continuous
shooting and burst shooting.
3
Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
4
Press the shutter release button fully.
Pictures are taken continuously as long as you keep the shutter
release button pressed.
• The flash does not discharge in
j
and
c
modes.
•
j
and
c
cannot be selected in
9
(Green),
b
(Auto Picture),
(Digital Microscope), A (Night Scene), C (Movie),
(Underwater Movie),
S
(Fireworks),
N
(Frame Composite),
X
(Digital Wide) or F (Digital Panorama) modes.
• Digital Zoom and Intelligent Zoom are unavailable when the sensitivity
is set to 3200 and higher.
Four-way controller
4 button
Shutter release
button
MENU MENU Cancel Cancel MENU Cancel OK OK OK OK OK OK
Drive Mode Drive Mode Drive Mode
Continuous Shooting Continuous Shooting Continuous Shooting