Pentax WG-10 Operating Manual Download Page 247

Page: 247 / 298

245

Conne

ctin

g to a

Com

puter

Click [Finish].

“MediaImpression 3.6.1 LE”
installation is complete.

Click [Exit] on the installation screen.

The window closes.

Install the image viewing/managing/editing software (MediaImpression
2.2 LE).

Turn your Macintosh on.

Insert the CD-ROM into the CD-ROM drive.

Double-click the CD-ROM icon.

Double-click the [Pentax Software Installer] icon.

The “MediaImpression 2.2 LE” installer screen appears.

Click [ArcSoft].

The setup screen appears.
Follow the on-screen guidance to
install the software.

Macintosh

Summary of Contents for WG-10











































































































































































































































































































Search results

Summary of Contents for WG-10

Reviews:

Related manuals for WG-10

Brands by name

Popular brands

Pentax WG-10, Operating Manual

Search results

Summary of Contents for WG-10

Reviews:

Related manuals for WG-10

Brands by name

Popular brands