Pentax 203125 - PocketJet II B/W Direct Thermal Printer, User Manual

Page: 31 / 74

Page 23
2. Set the value of the No Feed Mode Extra Feed to the amount of
margin you wish to have between the final printed line and the end of
the document. For example, 200 lines equal 1 inch. This allows paper
advancement from the print head area inside the printer to a position
outside the printer. This provides for a “tear-off” position from a
continuous roll feed that will include the entire printed image.
3. The Paper Size selected does not affect this mode except to provide a
maximum number of lines per page.
B. Infinite Length Forms (such as geological recordings or polygraph
charts) – (Only available in Win 9x/Me, Win NT, and Win 2000/XP
drivers)
1. Select No Feed Mode.
2. Select “Infinite Paper Size.”
3. Set the value of the No Feed Mode Extra Feed to the desired
length.
4. Check to be sure that the Top/Bottom margins within your
application software are set to zero (0).
C. Fixed Page Length
1. Select Fixed Page Mode.
2. If the length corresponds to one of the pre-defined paper sizes
(Letter, Legal, or A4), select the desired paper size from the Advanced
Features Setup using the Control Panel method instead of the
application software’s Print Setup in order to make it permanent (under
the “Paper” property sheet in Windows 95 or the “options” under
Windows 3.1).
3. If the fixed length desired is not one of these sizes, use the Advanced
Features setup as explained in #2 above to select User Defined Paper
Size. Set the width and length as desired.
D. Multipage Documents with “tear off” for EACH page
Note: This feature is only available with Win 9x/Me and has recently
been added to the Win2k/XP driver (check the Pentax website for the
latest driver).
Select “Prompt” for Win 9x or “Roll Paper Pause” for Win 2k/XP for
Paper Source on the “Paper” tab within the printer properties control
panel. This setting causes a dialog to be displayed before EVERY
printed page, including the first one.