Page 20
NOTE: You can print only one side of the paper. This is the smooth,
coated side. See Chapter 3, “Tips on Using Paper.”
FIGURE 9. Inserting a sheet of paper
4. Print one or more pages from any software application.
The green DATA indicator light blinks to indicate that the printer is
receiving data from your computer.
NOTE: If you have inserted paper into the input slot and the green
DATA light stays on (without blinking), the printer has
received insufficient data to print an entire page. Press and
hold the green Power button to eject the page.
Turning the Printer OFF
Press the main switch twice quickly to turn the printer off.
NOTE: If a battery is powering the printer and the Auto-Off Timer
feature is enabled, the printer will turn itself off
automatically after two minutes of inactivity.
Making Prints Lighter or Darker
You can make prints lighter or darker by using the Print Density Setting
in the printer driver dialog. See “Advanced Features,” below.
NOTE: Changing the density setting results in slight changes in the
printer’s speed and the number of pages that can be printed
on a battery charge.
Light print density may indicate too low a voltage (less than 11.8 volts)
if the unit is being powered by a vehicle DC supply. Check and correct
the supply voltage, if needed, or be sure the vehicle engine is running.
Summary of Contents for 203125 - PocketJet II B/W Direct Thermal Printer
