Pentax 203125 - PocketJet II B/W Direct Thermal Printer, User Manual

Page: 24 / 74

Page 16
10. Choose OK, otherwise the installation will be canceled
a. If you have the installation diskettes (or CD), insert them into
the appropriate drive.
b. If you do not have the installation diskettes (or CD), the
required files may already be on your system and do not need
to be reinstalled. Choose “Skip File” instead. Do this step
(choosing “Skip File”) three times, once for each of the three
UNIDRV files being installed if you do not have your CD.
c. If you have tried steps “a” and “b” and you find that the driver
is not on your system, contact Technical Support.
1. If you chose to “Print Test Page” while following the on-screen
instructions and the PocketJet is connected to your computer, you
have inserted paper into the printer, and it is turned on, the printer
should now be printing.
Windows 3.1
• Manual Install
1. Insert the Driver Disk CD into the CD disk drive.
2. From the Control Panel, double-click “Printers.”
3. Choose
“Add.”
4. Choose “Install Unlisted or Updated Printer.”
5. Choose
“Browse”
6. Follow the on-screen instructions.
•
In the “Drives” list box, select the drive letter corresponding to
your CD-ROM drive.
•
In the “Folders” list box, double-click on “PJ200” or “PJ2”.
•
In the “Folders” list box, double click on the “Win31” directory.
•
Choose the “OEMSETUP.INF” file, then click “OK,” then
follow any remaining onscreen instructions.
Windows NT 4.0
• CD Install
Check the Pentax website for the latest information on current drivers.
1. Insert the Driver Disk CD into the computer’s CD drive.
2. Select
“Installation.”
3. Select “PocketJet 200” or PocketJet II,” then select “continue.”
4. Fill in the requested product registration information and then click
“continue,” or click “skip” to proceed.
5. Select “PocketJet 200” or “PocketJet II,” select Windows NT,” and
click “continue.” The AutoInstall program will begin.
6. Select “Next.”
7. Select the “Port.”
8. Select the “Model.”
9. Select the printer name and the default.
10. Click on “Finish.”