Page 14
Windows CE Systems
Refer to the Pentax website at
www.pentaxtech.com
for the most
current driver solutions.
1. Install Windows CE Services or Active Sync on your desktop
computer.
2. Connect your Windows CE device to your desktop computer with
the serial cable provided.
3. Insert the Driver Disk CD into the desktop computer’s CD drive.
4. Select “Installation,” select “PocketJet200” or PocketJet II,” and
click continue.
5. Complete the registration information and then click “continue,” or
click “skip” to proceed without completing the registration process.
6. Select “PocketJet 200”or PocketJet II” select “WindowsCE,”
deselect any other operating system, and click “continue.”
7. Follow the on-screen instructions and complete the installation by
clicking on “Done.” Note: You must select the version of
Windows CE (either 2.0 or 2.1) that is installed in your computer.
8. Complete any additional warranty information requested, and then
submit it using your preferred method.
9. Disconnect your Windows CE device from the desktop computer.
Note: For uninstall instructions, see the “Read Me” file on the driver
disk.
Summary of Contents for 203125 - PocketJet II B/W Direct Thermal Printer
