Pentax 203125 - PocketJet II B/W Direct Thermal Printer, User Manual

Page: 14 / 74

Page 6
Setting DIP Switches
1. Make sure the printer is turned off.
2. Set the printer face down so that the battery compartment is towards
you.
3. Using a pointed object such as a mechanical pencil or paper clip,
gently move each DIP switch to the desired position: towards you for
OFF, away from you for ON.
4. Turn the printer face up, turn the printer on and continue.
Printing a Self-Test Sheet
1. Make sure the printer is turned off.
2. Using a pointed object such as a mechanical pencil or paper clip,
gently move DIP switch 1 to the OFF position (all others should be in
the ON position).
3. Place a sheet of paper in the printer.
4. Press the power switch once quickly. A test pattern should be printed
on this paper as it is fed through the printer.
5. If you need to print multiple test pages, repeat steps 1 through 4
above as needed.
6. When finished, turn the Printer off and reset DIP switch 1 to the ON
position.