Pentax 203125 - PocketJet II B/W Direct Thermal Printer, User Manual

Page: 19 / 74

Page 11
•
(For printing MS Word/Excel/Outlook documents) <CD
Drive>:\<PJ200 or PJ 2>\PocketPC\PrintPocketCE\
PrintPocketCE_Install.exe
•
(For printing from Pocket Internet Explorer) <CD Drive>:\<PJ200
or PJ 2>\PocketPC\PIEPrint\PIE Print_install.exe
Note: PIEPrint requires PocketPC 2002 or higher.
1. Choose “OK” and follow the on-screen instructions.
2. Synchronize with your PocketPC.
Palm OS Systems
There are three choices for time trial printer drivers available on the
PocketJet Driver CD for Palm devices supporting PocketJet 200
printers as shown below (Contact Pentax Technical Support at 1-800-
453-6144, ext. 1820 for Palm OS System support for the PocketJet II).
Each choice is provided by a different 3
rd
-party vendor and all provide
similar functionality. Choose one, or try all three, to determine which
one you like the best. The trial version will give you a notification that
it will “shut off” before the end of the trial period with the option to
purchase a copy. Contact the application provider to purchase your
copy (
www.instepgroup.com , www.iscomplete.com , or
www.stevenscreek.com ). Refer to the vendor’s website for the latest
software updates.
Note: Both ISComplete and Stevens Creek support Palm OS 5.x and
earlier. InStep Print only supports Palm OS 4.x and earlier.
• CD Install
1. Connect your Palm to your desktop or laptop PC.
2. Insert the Driver Disk CD in your CD drive.
3. Select “Installation,” select “PocketJet 200,” and click “continue.”
4. Complete the registration information and then click “continue,” or
click “skip” to proceed without completing the registration
information.
5. Select “Pentax PocketJet 200,” select “PDA” (deselect any other
operating system), and click “continue.”
6. Select “Palm OS,” then click “continue.”
7. Select “Show Me” to get more information on using your PocketJet
with Palm OS devices, then close that window and select one or
more of the three drivers listed, and then click “Continue.”
8. For each driver selected, you will now automatically run through
each install program, one by one, and then HotSync with your
Palm.
9. Complete any additional warranty information requested, and then
submit it using your preferred method.
10. Click “exit.”