Pentax 19541 Operating Manual Download

Page: 60 / 268

asic

ions

Look through the viewfinder to
view the subject.

A zoom lens can be used to change the
size of the subject in the viewfinder.

Using a Zoom Lens (p.61)

Position the subject inside the
AF frame and press the shutter
release button halfway.

The autofocus system operates. The focus

indicator

]

appears in the viewfinder

when the subject comes into focus.
When set to

(Auto Picture) mode,

the optimal capture mode is automatically

selected from Portrait, Landscape,

Macro, and Moving Object modes or

standard settings (Normal mode).
The flash pops up automatically when

necessary. (Push the

button and

manually lift the flash when Flash mode is

not set to [Auto discharge] or [Auto

flash+Redeye reduct]).

Operating the shutter release button

(p.59)

Subjects that are Difficult to Focus on

(p.60)

Using the Built-in Flash (p.62)

Selecting the Focusing Area (AF Point) (p.105)

Press the shutter release
button fully.

The picture is taken.

You can preview the image in the monitor and check the composition,
exposure, and focus before taking the picture. (p.112)

Focus indicator

Flash

status

Summary of Contents for 19541













































































































































































































































































Search results

Summary of Contents for 19541

Reviews:

Related manuals for 19541

Brands by name

Popular brands

Pentax 19541, Operating Manual

Search results

Summary of Contents for 19541

Reviews:

Related manuals for 19541

Brands by name

Popular brands