Pentax 19541 Operating Manual Download Page 43

Page: 43 / 268

Gettin

Sta

rte

Inserting/Removing the SD Memory

Card

This camera uses either an SD Memory Card or an SDHC Memory Card. (Both

cards are referred to as SD Memory Cards hereafter.) Make sure the camera is

turned off before inserting or removing the SD Memory Card (market product).

Slide the card cover in the

direction of the arrow (

) and

then lift open (

Insert the card all the way with

the SD Memory Card label

toward the monitor.

Push the SD Memory Card in once to
remove.

Close the card cover (

) and

then slide it in the direction of

the arrow (

• Do not remove the SD Memory Card while the card access lamp is lit.
• Use this camera to format (initialize) an SD Memory Card that is unused or

has been used on other cameras or digital devices. Refer to “Formatting the

SD Memory Card” (p.203) for details on formatting.

Be sure to fully close the card cover. The
camera will not turn on if the card cover is
open.

Summary of Contents for 19541













































































































































































































































































Search results

Summary of Contents for 19541

Reviews:

Related manuals for 19541

Brands by name

Popular brands

Pentax 19541, Operating Manual

Search results

Summary of Contents for 19541

Reviews:

Related manuals for 19541

Brands by name

Popular brands