Pentax 19541 Operating Manual Download Page 140

Page: 140 / 268

138

ing
the

Flas

Changing the Built-in Flash Discharge Method

You can change the built-in flash discharge method in wireless mode.

Set in [16. Flash in Wireless Mode] in the [

Custom Setting] menu (p.76).

Wireless Shooting

Using a Combination of the Built-in Flash and an External Flash
Unit

1 Remove the external flash unit after the channel was set on the camera,

and place at the desired location.

2 Set the camera flash to

mode, and pop up the built-in flash.

3 Confirm that both flashes are fully charged and then take the picture.

Using a Combination of External Flash Units

1 Set the wireless mode of the external flash directly connected to the

camera to [MASTER] or [CONTROL].

2 On the wireless remote flash unit, set the wireless flash mode to

[SLAVE] and set the channel to the same channel as the flash directly
connected to the camera. Then, place at the desired location.

3 Confirm that both flashes are fully charged and then take the picture.

Discharges the built-in flash.

Off

Discharges the built-in flash as a control flash.

(High-speed sync) is not available when the camera is set to discharge

the built-in flash.

MASTER

Discharges both the flash directly connected to the camera
and the wireless flash unit.

CONTROL

The flash directly connected to the camera is discharged as
a control flash only and does not discharge as main flash.

Shake Reduction is not available in Wireless mode.

Summary of Contents for 19541













































































































































































































































































Search results

Summary of Contents for 19541

Reviews:

Related manuals for 19541

Brands by name

Popular brands

Pentax 19541, Operating Manual

Search results

Summary of Contents for 19541

Reviews:

Related manuals for 19541

Brands by name

Popular brands