Pentax 19541 Operating Manual Download

Page: 133 / 268

131

ing
the

Flas

You can use slow-speed-sync when shooting portraits with the sunset in the
background. Both the portrait and the background are captured beautifully.

Using

(Shutter Priority) Mode

1 Set the mode dial to

(Shutter Priority) mode is set.

2 Use the e-dial to set the desired shutter speed.

The background is not properly exposed if aperture value is blinking

when shutter speed is set. Set the shutter speed so that aperture value

does not blink.

3 Press the

button.

The flash pops up.

4 Take the picture.

Using

(Manual) Mode

1 Set the mode dial to

(Manual) mode is set.

2 Set the shutter speed (under 1/180 sec.) and aperture value to obtain

correct exposure.

3 Press the

button.

The flash pops up.

(Manual) mode, you can raise the flash at any time prior to shooting.

4 Take the picture.

Using Slow-Speed-Sync

• Slow-speed-sync slows the shutter speed. Use the Shake Reduction function

or turn off the Shake Reduction function and use a tripod to avoid camera
shake. The picture will also blur if the subject moves.

• Slow-speed-sync shooting can also be performed with an external flash.

Summary of Contents for 19541













































































































































































































































































Search results

Summary of Contents for 19541

Reviews:

Related manuals for 19541

Brands by name

Popular brands

Pentax 19541, Operating Manual

Search results

Summary of Contents for 19541

Reviews:

Related manuals for 19541

Brands by name

Popular brands