Pellas X HYBRID 44, User Manual

Page: 9 / 39

7 | S t r o n a
The burner is composed of the following subassemblies:
 Combustion chamber including: furnace (1) made of the highest quality steel heat-
resisting steel and a covering pipe (2),
 Blowing assembly including a cover made of non-combustible ABS V0 (3), X.PLUG socket
(4) located to the right of the burner where the controller plug is to be connected,
 Blowing system- is located underneath the cover and it is a connector between the blowing
assembly and the combustion chamber. The upper part of the chamber houses the feeding
pipe and a chimney with a barrier (6) where the pipe connecting the burner to the fuel
feeder is attached. The chimney is mounted to the rectangular opening in the upper part
of the burner chamber. A steel barrier with a counterbalance is installed inside the
chimney. The barrier prevents backfire that would result in the fire entering the feeder.
It
is important that the counterbalance is not locked.
The cover of burner does not have any protruding nor sharp parts. It does not threat one’s health.
The temperature of burner’s cover during operation should not exceed 60ºC with exception of
places of raised temperature, i.e. bakery.
ATTENTION!
The producer reserves the only right
to implement from any changes in
construction of burner and feeder,
its software and wiring, otherwise he is
freed responsibilities to the buyer.