Pellas X HYBRID 44, User Manual

Page: 8 / 39

6 | P a g e
2.1.1. HYBRID Mini and HYBRID Mini 35 models
Pic. 1. Construction of HYBRID Mini and HYBRID Mini 35 burners.
The burner is composed of the following subassemblies:
 Combustion chamber including: furnace (1) made of the highest quality steel heat-
resisting steel and a covering pipe (2),
 Blowing assembly including a cover made of non-combustible ABS V0 (3), X.PLUG socket
(4) located to the right of the burner where the controller plug is to be connected,
 Blowing system (5) located between the blowing assembly and the combustion chamber
with a quick-coupling in the upper part (6) to be attached to the feeding pipe by turning it
clockwise (detaching is carried out in the reverse direction). Afterwards the pipe which
connects the burner with the fuel feeder is connected to the quick coupling.
The cover of burner does not have any protruding nor sharp parts. It does not threat one’s health.
The temperature of burner’s cover during operation should not exceed 60ºC with exception of
places of raised temperature, i.e. bakery.
2.1.2. HYBRID 44 model
Pic. 2. Construction of HYBRID 44 burner.