Glitch Rhythm Machine (cont)
ConJnue from the previous example with the following changes:
6. Set the Buffre Pitch amount to about 2400 cents.
7. Create a second Matrix PaYern Sequencer. Hit the TAB key to view the rear of the rack and
connect the ‘Matrix 2’ Gate output to the Buffre 1 ‘Advance Quarter Note’ input.
8. TAB back to the front of the rack, and edit the sequencer gate events. Program gate events
on step 1, step 5, step 9 and step 13. All other gate steps should be off. (see image on
previous page).
9. Press Play on the Sequencer Transport to hear the glitching rhythmic loop that changes on
each beat.
As the loop plays, try adjust the Pitch parameter, Length Sweep, Randomize and Release. Add
some glitching by adjusJng the Bit Crush wheel. If you have the Propellerheads Pulsar Dual LFO
device, try modulaJng these parameters with control voltage connecJons. Also, try seWng
different “Advance” gate triggers to change the resampling paYern.
v1.0.2 operation manual
29
