Rear Panel Connections
v1.0.2 operation manual
4
9
10
12
13
14
15
16
#
Connection
Function
Sequencer Control
1
Gate (Trigger Loop)
Sequencer Control Gate and CV Signals must be
received as a pair to engage the loop engine. Connect
2
CV (Loop Duration)
received as a pair to engage the loop engine. Connect
to a Matrix or Thor Step Sequencer
Modulation Inputs
3
Volume
CV In - Unipolar Control for volume
4
Pitch
CV In - Bipolar Pitch Control
5
Length Sweep
CV In - Bipolar Pitch Control
6
BitCrush CV
CV In - Unipolar BitCrush Control
Gate Inputs
7
Reset Position
Gate In - Resets the Loop Start
8
Advance Quarter Note
Gate In - triggers the Advance function
9
Backwards Quarter Note
Gate In - triggers the Backwards function
Modulation Outputs
10
Loop Start
Gate Out - Trigger sent at the start of a loop
11
Position
CV - Unipolar value that corresponds to position
Audio
12
Audio Inputs
Stereo or Mono Audio Connection
13
Audio Outputs
Stereo Audio Output Connection
FX Sends
14
FX Send 1 Outputs
The FX Send outputs send audio signals that are
15
FX Send 2 Outputs
The FX Send outputs send audio signals that are
currently looping. The signal level is post fader relative
to the volume control
16
FX Send 3 Outputs
to the volume control
1
2
3
4
5
6
7
8
11
