Pattern Sequencing Buffre (cont)
Buffre only responds to the first Note CV received. In the illustration below, the Matrix
Pattern sequencer plays a scale from D1 to G#1 while the gate value is sustained for 12
steps. For the duration of the 12 steps, Buffre will only play a half note loop of eight
steps. This corresponds to the first Note CV value received, D1.
11. ConJnue with the configuraJon created before with Buffre triggering four 1/16th note
loops.
12. Hit the TAB key to view the rear of the rack.
13. Connect the Matrix Curve CV output to the Buffre Length CV (Pitch Wheel) Input. Leave the
CV trim seWng to the default of 127.
14. Set the Matrix Curve CV to Bipolar mode, then hit TAB again to navigate to the front of the
rack.
15. Switch the Matrix to Curve Edit mode and draw a sine-‐like modulaJon waveform on the
programmer display.
16. Press Play on the Transport and you will hear the Matrix Curve CV change the loop duraJon,
causing the loop segments to speed up and slow down as they are triggered. Experiment
with different curve seWngs and different gate paYerns to create some interesJng
acceleraJon loop effects.
v1.0.2 operation manual
27
