Loop On (cont)
Loop On Disabled with the beat repeater engaged
Loop On can be disabled while a repeater loop is already engaged, allowing you to end
and silence the audio signal. If the Loop On button is disabled during the first cycle of
the loop, playback continues until the end of the cycle, and then stops. If the repeat
effect has gone through one or more loop cycles, audio will immediately stop if the
button is switched off. If you continue to hold the trigger and switch the button on again,
playback continues at the point where it stopped.
This feature can be used in conjunction with the Reset, Backwards Quarter, and
Advance Quarter buttons and control voltage inputs. Pressing the Reset Button will
retrigger and override playback start position allowing you to create time distortion
effects. This is covered in more detail in the
Position Actions
section.
v1.0.2 operation manual
14
