PCS Digital PCS Mail, Installation Manual

Page: 7 / 71

PCS mail
- 6 -
| Installation Manual |
Introduction
PCS digital Disclaimer
This manual contains current information about the PCS mail as written during
the month of January 2004, its content is subject to change without notice. Every
effort has been made to ensure the accuracy of any information provided.
Electric-Static Discharge
All electronic components are susceptible to Electro-static discharge and the
PCS mail
is no exception. If necessary to handle Printed Circuit Boards (PCB)
be sure to pick them up by the edges; never touching any of the electronic
components. It is imperative to store any PCB in an anti-static bag when they it
is not installed in a system. Additionally, to ensure the longevity of the
components always use an anti-static wrist strap or grounding strap while
installing the equipment. Any damage cause by Electro-static discharge or
mishandling will void the warranty provided by PCS digital
Voltage Do’s and Don’ts
Be sure to check the local electrical codes for the proper installation of telephony
equipment and electronic components. Follow the safety guidelines provided by
the UL document 1459, issue 2, which is the safety specification for all telephone
equipment installations. Also, it is important to check the electrical outlet that will
be used for the equipment, for proper wiring and voltage levels. For example,
the neutral to ground voltage is critical for sustaining electronic components and
keeping them at their optimal operational levels and ensuring their longevity.
Typically an AC voltage reading of less than .05 VAC between your neutral to
ground is acceptable. Anything higher or having a constant deviation will result
in electronic component damage.
Safety Guidelines
When installing telephone equipment, the basic safety precautions should be met
in order to minimize the risk of fire and or electrical shock.
Read and understand all instructions in this manual and safety
documentation.
Do not use or install equipment where it is prone to water hazard or other
liquids.
Read and understand all labels on product prior to installation.
Install equipment on a dry flat fire retardant Plywood and never install on a
shelf or desktop.